User Guide (Chinese)
Plug-in software

User Guide (English)
Plug-in software

• AUX_IP
• Allows you to select AUX output material from a remote control panel (Venetex VS-R45) connected on the network.
      Protocol

• External_Control
• Allows you to switch buses and transmit/receive material name information between external devices connected to the network. You can also switch the SourceLink settings (Master/Slave) from external devices.
      Protocol

• EXT_Panel_IP
• Allows you to select the source for each bus on the external panels (Lawo LBP series) connected to the network, perform video transmissions, and play back macro memories and shot memories.
     

[User Guide]

Plug-in software User Guide

• AUX_IP
• Allows you to select AUX output material from a remote control panel (Venetex VS-R45) connected on the network.
  

• GVG 200
• Allows you to control GVG200-protocol compliant devices connected to the serial port (RS-422) on the switcher.
  

• Serial Tally
• Allows you to output tally information in serial communication format compatible with TSL UMD Protocol V3.1.
  

[User Guide]

Plug-in software (English)

Plug-in software (Chinese)

• AUX_IP Ver 3.04
• To select AUX output material, PGM and KEY,etc. from a remote control panel (Venetex VS-R45) connected to the network.
     Protocol

• GVG 200 Ver 3.00
• To control GVG200-protocol compliant devices connected to the serial port (RS-422) on the switcher.
     Protocol

• TALLY (Serial Tally) Ver 3.00
• To output tally information in serial communication format compatible with TSL UMD Protocol V3.1.
  

• P2_Control Ver 3.00
• To connect P2 devices via a serial communication format (RS-422) and control operations such as recording and playback.
  

• External_Control Ver 3.00
• To switch buses and transmit/receive material name information between external devices connected to the network. You can also switch the SourceLink settings (Master/Slave) from external devices.
     Protocol

[User Guide]

English
Plug-in software

EXT_Panel_IP

Chinese
Plug-in software

EXT_Panel_IP

• EXT_Panel_IP Ver 1.01 ( for AV-HS6000 Ver 4 )
• The following operations can be performed from external panels (LAWO LBP series) that are connected via an IP network. Bus source selection, Video transitions, Macro memory playback, Shot memory playback and etc.
     

• AUX_IP Ver 3.04
• To select AUX output material, PGM and KEY,etc. from a remote control panel (Venetex VS-R45) connected to the network.
     Protocol

• GVG 200 Ver 3.10 ( for AV-HS6000 Ver 4 )
• To control GVG200-protocol compliant devices connected to the serial port (RS-422) on the switcher.
     Protocol

• TALLY (Serial Tally) Ver 3.00
• To output tally information in serial communication format compatible with TSL UMD Protocol V3.1.
  

• P2_Control Ver 3.00
• To connect P2 devices via a serial communication format (RS-422) and control operations such as recording and playback.
  

• External_Control Ver 3.00
• To switch buses and transmit/receive material name information between external devices connected to the network. You can also switch the SourceLink settings (Master/Slave) from external devices.
     Protocol

• CAM_Control Ver 1.03  ( for AV-HS6000 Ver 4 )
• It allows you to perform pan, tilt, preset playback, and other controls for Integrated cameras (Remote cameras)  connected to the network.
  Supported models: AW-HE130, AW-HE40/HE65, AW-UE70 series
  
  And, if a sub control panel is connected with Main Frame, any of Pan, Tilt, Zoom, Focus and Iris operations cannot be performed using the lever.
     

• Macro Trigger IP  ( for AV-HS6000 Ver 4 )
• Specified macro can be executed by receiving a specific command sent via the TCP/IP protocol from the external device connected to the network. Use 63000 for the TCP/IP port number.
     

[User Guide]

Plug-in software User Guide

• CAM_COM [ AW-CAM (Serial) ]
• This application makes it possible to control the pan, tilt, zoom, focus and other functions from the AV-HS410 once a Panasonic professional camera (AW series) has been connected with a serial interface (RS-422).
  

• P2 Remote
• This application makes it possible to control the recording, playback and other operations from the AV-HS410 once a Panasonic P2 device has been connected with a serial interface (RS-422).
  

• GVG Protocol
  Ver2.02 (Update November 2013)
• This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled once a remote control panel (VS-R45 made by Venetex) or editor (that supports the GVG100 communication protocol) has been connected with a serial interface (RS-422).
  The GVG100 communication protocol is supported.
  

• AUXP_IP [ VS-R45(IP) ]
• This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled once a remote control panel (VS-R45 made by Venetex) has been connected with a network.
  

[User Guide]

ClipConvert User Guide

[Operation environment]

Windows

Operating system
Windows XP SP2 or later
Windows Vista
Windows 7

Processor
Intel® Core 2 DUO 2.4 GHz or faster recommended

RAMF
1GB or more recommended

AV-HS410 ClipConvert

[User Guide]

AV-HS410 Plug-in software User Guide

• CAM_IP [ AW-CAM (IP) ]
• This application makes it possible to control the pan, tilt, zoom, focus and other functions from the AV-HS410 once a Panasonic professional camera (AW series) has been connected to a network (IP).
  

• CAM_COM [ AW-CAM (Serial) ]
• This application makes it possible to control the pan, tilt, zoom, focus and other functions from the AV-HS410 once a Panasonic professional camera (AW series) has been connected with a serial interface (RS-422).
  

• P2 Remote
• This application makes it possible to control the recording, playback and other operations from the AV-HS410 once a Panasonic P2 device has been connected with a serial interface (RS-422).
  

• GVG Protocol
  Ver2.02 (Update November 2013)
• This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled once a remote control panel (VS-R45 made by Venetex) or editor (that supports the GVG100 communication protocol) has been connected with a serial interface (RS-422).
  The GVG100 communication protocol is supported.
      IF Specification

• AUXP_IP [ VS-R45(IP) ]
  Ver2.02 (Update November 2013)
• This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled once a remote control panel (VS-R45 made by Venetex) has been connected with a network.
      IF Specification

• HS410_IF
  Ver2.01
• This application makes it possible to have the crosspoint switching, AUTO transitions and other operations controlled external devices (PC) have been connected with a IP network.
      IF Specification

[User Guide]

User Guide

[Operation environment]

Windows

Use a host computer that satisfies the following conditions.
CPU Intel® Core 2 DUO 2.4 GHz or faster recommended
Memory Microsoft® Windows® XP:1 GB or more recommended
Microsoft® Windows Vista®, Microsoft® Windows® 7:2 GB or more recommended
Network function 10BASE-T or 100BASE-TX
Image display : Resolution: 1024 x768 pixels or more
Color generation: True Color (24 bits or more)
Supported operating system
Microsoft® Windows® XP, Microsoft® Windows Vista®,Microsoft® Windows® 7
Hard disk drive At least 50 MB of free memory
CD-ROM drive (for using the Operating Instructions and various software)
Adobe® Reader® (for browsing the Operating Instructions on the CD-ROM)