Windows P2 Driver Software USB 1394 CardSlot PCIe 

P2 driver software is required for Windows computers to recognize the P2 Card.

P2 Driver Software for Windows 7/ 8/ 8.1 (32bit)

P2 Driver Software for Windows 7/ 8/ 8.1 (64bit)

  • Notice: IEEE1394 Driver
    Installing in Windows 8 or 8.1 is not supported. Writing onto P2 cards using IEEE1394b interface under Windows 7 is not supported.
  • Notice: CardBusDriver
    The P2 card driver needs to be installed for each card bus slots.
    When installing Driver software to a personal computer that has two or more card bus slots, please insert the P2 card into every slot. In addition, installing in Windows 8.1 is not supported.
     
  • On Windows 8 or 8.1, the message “Windows protected your PC” may be displayed and you may not be able to start the installer.
    In this case, click “Details” on that message screen, and then click “OK”. You will be able to start the installer.

The following devices are supported by P2 driver packages
P2 Driver packages ( package version 2.23 )
  USB Driver
AG-HPX170 series AJ-MPD1G AJ-PX270 series AJ-HPS1500
AG-HPX250 series AJ-PCD2 AJ-PX5000 AJ-HPD2500
AG-HPX255 series AJ-PCD10 AJ-PX2300 AJ-SPC700
AG-HPX300 series AJ-PCD20 AJ-PD500 AJ-SPX800
AG-HPX370 series     AJ-SPX900
AG-HPX500 AJ-HPM100 AJ-HPX2000 AJ-SPD850
AG-HPX502 AJ-HPM110 AJ-HPX2100 AJ-PCS060G
AG-HPX600 series AJ-HPM200 AJ-HPX3000   
AG-HVX200    AJ-HPX3100  
AG-HVX202 AG-HPD24   AJ-HPX2700  
AG-HVX200A series   AJ-HPX3700  
AG-HPG10      
AG-HPG20      
AG-MSU10      
            AJ-PCD30 (USB Driver and dedicated Power Management application software for AJ-PCD30)
AJ-PCD20 1394b Driver
(Installing in Windows 8 or 8.1 is not supported. Writing onto P2 cards using IEEE1394b interface under Windows 7 is not supported.)
AJ-PCD35 PCIe Driver
CardBus Driver (Installing in Windows 8.1 is not supported.)
AJ-PCS060G Store Manager ver 1.06-(Installing in Windows 8 or 8.1 is not supported)
AJ-PCS060 Manual (1.5MB) Download   AJ-PCS060 HDD maintenance software