Software for P2 Card E series
P2 card E series
AJ-P2E016XG
AJ-P2E032XG
AJ-P2E064XG

(FUJIFILM)
P2MCE16-WW/CN
P2MCE32-WW/CN
P2MCE64-WW/CN

(Maxell)
P2C-16E
P2C-32E
P2C-64E
  • ATTENTION:
  • AJ-PCD35 P2 drive requires a firmware upgrade.
  • P2 Card E Series can be used with your P2 devices as long as you don't use in the following conditions.
  • 1. 60Hz mode
    On some P2 devices, continuous recording on multiple P2 cards is not possible when performing loop recording, interval recording or one-shot recording in DV/DVCPRO format, or when performing 12P or 15P-VFR mode recording in DVCPRO HD 720P native format.
  • 2. 50Hz mode
    On some P2 devices, continuous recording on multiple P2 cards is not possible when performing 12P or 15P-VFR mode recording in DVCPRO HD 720P native format.

Software for P2 Products(Firmware)
Update schedule
AG-HPX170 series Supported 1.10 AJ-HPX2000 Supported 2.15 or higher
AG-HPX300 series Supported 9.30 or higher AJ-HPX2100 Supported 2.15 or higher
AG-HPX500 Supported 1.09    
AG-HPX502 Supported 1.09 AJ-PCD10 Supported 2.2
AG-HVX200 Supported 4.10 AJ-PCD20 Supported 2.40
AG-HVX202 Supported 4.10 AJ-PCD35 Supported 1.61
AG-HVX200A series Supported 4.10    
AG-HPG10 Supported 1.08- AJ-HPM100 Supported 2.05-
AG-HPG20 Supported 8.31 or higher AJ-HPM110 Supported 1.05