- Copying the data of two P2 cards to hard disk simultaneously. It make the
most of AJ-PCD35 transfer speed performance.
Enables P2 content viewing.
Supports metadata, voice memos, and text memos.
Allows copying to a hard disk.
P2 AVC-Intra data playback.(AVC-I Decoder is required.)
Displaying proxy data.
- P2 data playback:
DVCPROHD and SD (25M/50M)
Display and editing of metadata
Copying of P2 data to a hard disk
Recording and playback of voice memos
Voice memo production
Metadata upload file creation
Operating Environment (Windows)
- Microsoft(R) Windows XP Professional SP3.
Microsoft(R) Windows Vista Business, or newer OS.
Microsoft(R) Windows 7 Professional , or newer OS.
Microsoft(R) DirectX 9.0b or newer version must be installed. (This can
be downloaded from the Microsoft website.)
Full-color (32-bit) display, and an audio function.
The P2 driver included with the P2 product must be installed.
- QuickTime is
necessary for proxy playback. Please download it from the Apple Inc. download
site and install it.
confirmed for version 7.6.9.
DVCPROHD format clips cannot be played back on personal computers that
do not have a CPU that supports SSE2 instructions such as Pentium M, Pentium
4, Pentium D or Celeron D.
Recommended environment to play back DVCPRO HD format clips
CPU: Pentium D (3.2GHz or greater)
RAM: 1GB or greater
Recommended environment to play back AVC-Intra format clips
(If AVC-Intra 50)
CPU: Core2 Duo (2.66 GHz or greater)
RAM: DDR2-667 1 GB or greater
(If AVC-Intra 100)
CPU: Dual CPU configuration dual-core Xeon (3 GHz or greater)
RAM: DDR2-667 1 GB or greater
- About the high-speed playback mode
When the audio output channel is set to 1ch playback in the Customize panel,
it plays back in the high-speed playback mode. Because the load of CPU
is reduced in the high-speed playback mode, it is suitable for the playback
of DVCPRO HD and AVC-Intra contents.
However, in the high-speed playback mode, the spanned clip which is generated
when the target P2cards are changed during recording can not be played
continuously. And it takes 0.5 seconds or more to change clips to another.
In addition, it is likely to be waited for tens of seconds when there is
not enough performance of the personal computer for the decoding of DVCPRO
HD and AVC-Intra contents. The image is not displayed, and the black or
white picture is displayed during the waiting time.
When the voice memo play concurrently with the clip, the high-speed playback
mode is not used.
In case of the high-speed playback mode, when the selection clips are changed,
or when the playback begins and it ends, the black picture or half updated
view area might be displayed.
The audio only can be heard during playing back.
- Language:Japanese, English,Chinese(automatic recognition)
- In full screen mode, you can not pause and move the frame foward or backward.
When there are very many clips in the BIN area, the thumbnail might not
If the clip is made by Edit Copy Function on P2 products, the timecode
display on the view area and timeline scale might not be updated properly,
when the clip has discontinuous time code in the contents.
About user account
When only the driver for the P2 equipment has been installed without the
card bus driver, the card may not be displayed under a user account without
administrative rights. Be sure to use it with a user account with administrative
- The drivers for the P2 Card, P2 Camera Recorder, P2 Deck, P2 Drive, etc.,
must be installed on your PC before installing P2 Viewer.
These drivers are included with the P2 products,and latest version can
be downloaded from website.
Please click here to download latest P2 driver software for windows.
In order to use P2 Contents Management Software together with P2 Viewer
on the Windows PC, latest version of P2 Contents Management Software must
be installed.(Ver.1.2.0 or higher) If updated the P2 Viewer only, one of
software cannnot play back P2 Contents.
Please refer the Operation Manual downloaded with P2 Viewer.
English Operation Manual Download