AVCCAM Restorer

* AVCCAM Restorer Main features

The AVCCAM Restorer is software for restoring inconsistencies in video data recorded on an SD card.

  • The software mainly targets inconsistent data created under the following conditions.
  • -when the camera recorder fails to complete writing of the file in the normal manner due to the power being cut or the like, or when the user answers [No] to a [REPAIR CLIP? YES/NO?] message displayed upon re-inserting the SD card.
  • -when the writing of the recorded video data to the SD card has failed.

* System Requirments

Windows

  • Windows 8 (32bit)
    Windows 7 (32bit)
    Windows XP (32bit)
    Windows Vista (32bit)
  • Processor Intel® Core™ 2 Duo 2.4 GHz or higher CPU is recommended.
  • RAM 1 GB or more (2 GBs recommended)

Machintosh

  • Mac OS X 10.8 MountainLion (Intel Mac)
    Mac OS X 10.7 Lion (Intel Mac)
    Mac OS X 10.6 Snow Leopard (Intel Mac)
    Mac OS X 10.5 Leopard (Intel Mac)
    Mac OS X 10.4 Tiger (Intel Mac)
  • Processor: Intel® Core™ Duo 2.0 GHz or higher CPU (including compatible CPU)

* Notice

  • Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used.
  • When 2 or more USB devices are connected to a personal computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.
  • Operation is not guaranteed in a multi-boot environment.
  • Log on with an administrator account before using this software.
  • Operation on a multi-monitor system is not guaranteed.
  • The operation of this software is not guaranteed if the drive or folder targeted for restoration is simultaneously accessed by other software. Be sure that any other software has finished its operations before using this restoration software.
  • This software can handle the contents on HFS Plus, FAT16 and FAT32. Operation for the contents on other file systems is not guaranteed.
  • This software will only run on personal computers having an internal clock set to times after 0.00 on January 1, 1970. On personal computers having a clock which is set to any time outside this range, the software may run abnormally, or fail to run at all.

Software Usage

Read the software usage agreement carefully, then select either "I accept" or "I do not accept."

Software License Agreement

AVCCAM Restorer (gSoftwareh) is developed by Panasonic Corporation (gPanasonich).
Panasonic grants you a non-exclusive license to use the Software in accordance with the terms and conditions below. By clicking on the "I accept" button of this Agreement, you agree to be bound by the terms and conditions below and may install the Software free of charge.
1 You may use this Software for purposes within the usage scope of SD memory cards by AVCHD products of Panasonic.
2 You may make one copy of the Software and related documentation, in whole or in part, solely for backup purposes.
3 Except for the backup copy described in item 2 above, you may not otherwise copy or modify the Software or related documentation.
You may not sublicense or transfer the license for the Software or related documentation to a third party regardless of whether such sublicense or transfer is free of charge.
It is also prohibited to sell software or hardware created using the Software.
4 You may not reverse-engineer, decompile or disassemble the Software in whole or in part.
5 This Agreement takes effect upon your acceptance of the terms and conditions herein and upon using the Software, and it will remain effective until terminated.
If you breach any of the terms and conditions herein, Panasonic reserves the right to terminate this Agreement and the license of the Software, and may be entitled to recover from you any damages suffered by Panasonic.
Upon termination, you must destroy the Software, all related documentation and copies.
You may terminate this Agreement at any time by destroying the Software, all related documentation and copies.
6 Panasonic MAKE NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, REGARDING THE SOFTWARE AND RELATED DOCUMENTATION OR USE OF THEM.
YOU ARE SOLELY RESPONSIBLE FOR ANY PROBLEM OR EXPENSES ARISING FROM THE SOFTWARE AND RELATED DOCUMENTATION OR USE OF THEM.
7 IN NO EVENT WILL Panasonic BE LIABLE FOR ANY DIRECT, INDIRECT, OR SPECIAL DAMAGES OR LOSSES ARISING FROM USE OR INABILITY OF USE OF THE SOFTWARE OR RELATED DOCUMENTATION.
8 Panasonic reserves the right to change the Software specifications and related documentation without notice.
9 This Agreement will be governed by and construed in accordance with the laws of Japan.
Export Rules
You agree that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited by the United States Export Administration Act or any other export laws, restrictions or regulations (collectively the "Export Laws").
In addition, if the Software is identified as export controlled items under the Export Laws, you represent and warrant that you are not a citizen, or otherwise located within, an embargoed nation (including without limitation Iran, Syria, Sudan, Cuba, and North Korea) and that you are not otherwise prohibited under the Export Laws from receiving the Software.
All rights to use the Software are granted on condition that such rights are forfeited, if you fail to comply with the terms of this agreement.