Windows  PTZ Control Center (AW-JJLPTZ01): Software Download
 PTZ Control Center is an application software that runs on Windows.
 You can remotely operate the Panasonic cameras present on the network in a very easy manner.
 (This has the functions equal to Easy IP Setup app and can configure the camera’s network settings.)
 

 

Release Notes

Dec. 2018 Ver.1.1.20

  1. AW-UE150 / UE155 are supported.
    • Full screen display of H.264 stream is possible only when the setting for Streaming Mode is as follows.
         H.264(UHD) / H.264 / JPEG(UHD) / NDI|HX

  2. Improved other functions
    • CPU utilization is high. This problem is fixed.
    • If you log in when a large number of cameras (60 – 80 units or more) are registered, the error message “Tracking Control process stopped. Start again.” repeatedly appears so that the app cannot be used. This problem is fixed.
    • Zoom operation is repeatedly performed using on-screen range specification function and exceeds the T-end. The behavior of the Zoom on this occasion is improved.
         Ver. 1.1.10: Back to W-end
         Ver. 1.1.20: Fixed at T-end

Jul. 2018 Ver.1.1.10

  1. Control of the camera's Pan /Tilt /Zoom /Full screen by clicking /touching the screen.
  2. Control of the camera by operating the keyboard or the game controller.

System Requirements

 • OS

  • Windows 7 (32bit/64bit)
  • Windows 8.1 (32bit/64bit)
  • Windows 10 (32bit/64bit)

 • PC

  • CPU: Core i5-2520M 2.50GHz or higher
  • Memory: 4GB or more

 • Supported Cameras

  • Integrated Camera
       AW-UE150 / UE155, AW-HR140, AW-HE130, AW-HE40/65, AW-UE70, AW-HE35, AW-HE38, AW-HE48, AW-HE58, AW-HN130, AW-HN40/65, AW-HN38, AW-UN70 
  • Control Assist Camera
       AW-HEA10 
  • POVCAM
       AG-UMR20/AG-UCK20, AG-MDR25/AG-MDC20
  • Confirmed version of camera's firmware
    • AG-UMR20/AG-UCK20:V1.11 or later
    • AG-MDR25/AG-MDC20:V1.11 or later
    • AW-UE150 / UE155
    • AW-HE130 series:V2.23 or later
    • AW-HR140:V1.09 or later
    • AW-UE70 series:V1.38 or later
    • AW-HE40/70/65 series:V1.68 or later
    • AW-HEA10:V1.16 or later

 Main Features

  • Control of the camera’s Pan /Tilt /Zoom /Full screen operations by clicking /touching the screen  
  • Control of the camera by operating the keyboard  
  • Control of the camera by operating the game controller that is made in other company  
  • Image of PTZ camera is displayed on the top screen and panorama still image considering the usage environment is displayed on the bottom screen, and PTZ operation is performed.
  • Control of the camera’s Pan/Tilt/Zoom operations via buttons or sliders
  • Registration/Call/Deletion of the camera’s presets (up to 9 presets)
  • Adjusting the camera’s image qualities (Focus, Iris, Gain, White Balance, Shutter, ND Filter)
  • Starting/Stopping the camera’s SD recording
  • Opening the camera’s web screen
  • (In the case of the operations below, simultaneous control of multiple cameras is possible.)
    • Control of the camera’s Pan/Tilt/Zoom operations via buttons or sliders
    • Registration/Call/Deletion of the camera’s presets (up to 9 presets)
    • Adjusting the camera’s image qualities(Focus, Iris)

 Other Features

  • This has the functions equal to Easy IP Setup app and can configure the camera’s network settings.
    (However, it cannot be started together with Easy IP Setup at the same time.)
  • The restriction of functions is possible by user rights.
  • The transfer of setting data is possible between PCs.

Please refer to the Operation Manual for more information.
pdf  Operation Manual (ENGLISH)
pdf  Operation Manual (CHINESE)