UX180 /UX170

Name

AG-UX180 /UX170 series Software (Firmware) Update Data

Last Update

Apr. 17, 2017

Model

AG-UX180 /UX170 series
AG-UX180P AG-UX180PJ AG-UX180PX AG-UX180EJ AG-UX180EN AG-UX180ED AG-UX180AN AG-UX180MC AG-UX170ED AG-UX170MC

Registered
Name/Size

DV91000003G / 64.2 MByte
Expected Time for Update Approx. 3min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver. 1.06-

Audio Level Meter not working, etc.
A problem is fixed, which occurs in Recording Mode after the camera is operated under the following conditions.
Symptom
- Audio Level Meter not working
- No output of SDI-embedded audio
- No output into headphones
There is no problem with recorded audio or playing back videos.
Conditions
- Headphone Mode: LIVE
- When the output setting is SDI;
- Any of the following operations is performed.
- - REC CHECK
- - Pressing the REC button while a video is being played
- - Turning the power OFF -> ON again before LCD is off
- - Switching from the thumbnail screen (Playback Mode) to Recording mode while FHD format is selected
A reboot or changing the above-mentioned settings can bring the camera back to normal, but the problem will be back again if the above conditions are met.
Damaged clip deleted in repairing process. (MOV/MP4 file only)
If the recording is not completed correctly due to a power interruption or others, the clip will be repaired automatically by rebooting the camera.
But, if the card is in the different slot from the one used in this incomplete recording and the auto-repair process is started, the damaged clip (MOV/MP4 file) will be deleted.
This will not occur on files except MOV/MP4 mode. This problem is fixed.

History or Release note

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AG-UX180 /UX170 series Software (Firmware) Update Data
Last Update	Apr. 17, 2017
Model	AG-UX180 /UX170 series AG-UX180P AG-UX180PJ AG-UX180PX AG-UX180EJ AG-UX180EN AG-UX180ED AG-UX180AN AG-UX180MC AG-UX170ED AG-UX170MC
Registered Name/Size	DV91000003G / 64.2 MByte Expected Time for Update Approx. 3min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver. 1.06- Audio Level Meter not working, etc. A problem is fixed, which occurs in Recording Mode after the camera is operated under the following conditions. Symptom Audio Level Meter not working No output of SDI-embedded audio No output into headphones There is no problem with recorded audio or playing back videos. Conditions Headphone Mode: LIVE When the output setting is SDI; Any of the following operations is performed. - REC CHECK - Pressing the REC button while a video is being played - Turning the power OFF -> ON again before LCD is off - Switching from the thumbnail screen (Playback Mode) to Recording mode while FHD format is selected A reboot or changing the above-mentioned settings can bring the camera back to normal, but the problem will be back again if the above conditions are met. Damaged clip deleted in repairing process. (MOV/MP4 file only) If the recording is not completed correctly due to a power interruption or others, the clip will be repaired automatically by rebooting the camera. But, if the card is in the different slot from the one used in this incomplete recording and the auto-repair process is started, the damaged clip (MOV/MP4 file) will be deleted. This will not occur on files except MOV/MP4 mode. This problem is fixed.
Content	History or Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)