Download |
Name |
AG-UX180 /UX170 series Software (Firmware) Update Data
|
Last Update |
Apr. 6, 2017 |
Model |
AG-UX180 /UX170 series AG-UX180P
AG-UX180PJ AG-UX180PX AG-UX180EJ AG-UX180EN AG-UX180ED AG-UX180AN AG-UX180MC
AG-UX170ED AG-UX170MC |
Registered Name/Size |
DV91000003F / 64.2 MByte Expected Time for Update
Approx. 3min |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
Ver. 1.05-
- SDI Output (3G-SDI, HD-SDI, SD-SDI) Problems such as ‘the status
of Audio CH2 not indicated’ are fixed.
- SD-SDI Audio If the camera is alternately put into Recording
Mode and Playback Mode, there may be a difference of a few samples in
phase between CH1 and CH2 on rare occasions. This problem is fixed.
- For AG-UX180ED/UX170ED India area model only
- Default setting value of Scene File is changed.
Default is changed
from F1 to F4. After this update is completed on India area model,
if "INITIAL SET" -"SCENE" is executed to initialize its settings, F4 is set
as the default setting of Scene File. (On models for other areas,
F1 is still the default setting as always.)
If menu settings including
Scene File are initialized, a customized state of settings will
be changed. So it is recommended that those settings should be stored
on an SD memory card before "INITIAL SET” is executed.
- Default
setting values of LCD is changed.
COLOR Default is changed from
"0” to an equivalent of "+5" CONTRAST Default is changed from "0”
to an equivalent of "+5”
|
History or Release note |
Preparation for Upgrade |
Copy the update file of the Software (Firmware) to an SD
memory card. Software can be updated using this SD memory card. Please
refer to the procedure in the site.(Printing out of the procedure is recommended.) |