Download
Name Software(Firmware) Update Data
Last Update Apr. 14, 2026
Model AW-UR100 GJ/MC
Registered
Name/Size		 DV91000704L / 81.6MB
Panasonic Corporation
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.42
  1. When the "Power On Position" menu was set to "Standby,"
    under certain conditions, the zoom position may not return to the correct position after the camera restarted.
    This problem has been fixed.
  2. The waiting time before user authentication could be re-entered may not be shortened
    even when the "Wait time mode" setting in the web screen menu was set to "Mode 2".
    This problem has been fixed.
  • Notes when updating from a version prior to Ver.1.35
    The internal parameters for P/T speed when using the P/T speed control command "PTS" have been updated.
    The P/T speed at zoom positions from mid-point to the telephoto end may be slower than before the update.
    Please be especially careful if you are using a P/T operation system that uses tracing memory.
History of release note
Preparation
for Upgrade
Download firmware file.
Install the EasyIPSetupToolPlus software to a Windows PC. Connect the PC to AW-UR100 via LAN.
Update it according the update procedure, please.

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)