| Download |
| Name |
Software(Firmware) Update Data |
| Last Update |
Mar. 12, 2026 |
| Model |
AW-UR100 GJ/MC |
Registered Name/Size |
DV91000704K / 81.6MB |
|
Panasonic Entertainment & Communication Co., Ltd. |
| Transfer |
All Rights Reserved |
| Software |
This software is update data for the applicable model above. |
| Content |
Ver 1.40
-
Note
The internal parameters for P/T speed when using the P/T speed control command "PTS" have been updated.
The P/T speed at zoom positions from mid-point to the telephoto end may be slower than before the update.
Please be especially careful if you are using a P/T operation system that uses tracing memory.
- Added Preset Smart Composition function
[Related MENU] PRESET
> PRESET SMART COMP : OFF,TARGET SYNC, w/WIDE CAPTURE
- SRT Bitrate Enhancement
(1) SRT(H.264)/SRT(H.265)
1080/60fps, 50fps : Bitrates lower than 16Mbps can be adjusted.
(2) Bitrates can be dynamically adjusted during SRT streaming.
- AF Function Enhancement
Added items to select the autofocus range.
[Related MENU] Lens
AF Sensitivity:Normal, Stable, Stable2
AF Area Size: Normal, Wide
Stable2:Long distances of 2m or more
Normal:Subject in the center of the screen
Wide:A wide AF frame covering approximately 70% of the entire screen
- Added a command for when the camera is not accessible via VPN or VLAN.
You can change the reserved segment on the camera using a CGI command.
- Regarding the response behavior to the P/T Speed Control command "PTS",
there was an inconsistency related to P/T speed, and the internal parameters have been updated.
* Please read the notes at the beginning of this article.
- Improved operational stability during SRT streaming.
|
|
History of release note
|
Preparation for Upgrade |
Download firmware file. Install the EasyIPSetupToolPlus
software to a Windows PC. Connect the PC to AW-UR100 via LAN. Update
it according the update procedure, please.
You can refer to the procedure in the site.(Printing out
of the procedure is recommended.)
|