Download
Name Software(Firmware)Update Data
Last Update May, 27, 2026
Model AK-UCX100
Registered
Name/Size
DP91000522G / 658 MB
© Panasonic Corporation
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
SYSTEM VERSION 01.79-000-00.00

Revision Overview
Please refer to the latest Operating Instructions for details.

If any of the following related equipment is in use, update each unit to the latest firmware version listed below:

AK-UCU700: Ver.0D.BF-000-01.00 or later
AK-HRP1000: Ver.5.19-00-0.00 or later
AK-HRP1005: Ver.5.19-00-0.00 or later
AK-HRP1010: Ver.1.29-00-0.00 or later
AK-HRP1015: Ver.2.21-00-0.00 or later

  1. SYNCHRO SCAN FINE Function
    Reduces scan line artifacts when shooting LED walls.
    [Related menu]
      PAINT > SHUTTER SPEED > SYNCHRO SCAN FINE: -5 to 0 to +5

  2. Addition of LOCAL/REMOTE MODE Function
    Adds a menu to select settings when the ROP/MSU system connection is disconnected.
    Allows system settings to be retained even if the connection is temporarily interrupted.
    [Related menu(OSD)]
      MAINTENANCE > LOCAL/REMOTE MODE

    AUTO(conventional behavior):
      Returns to "LOCAL"(UCX100)settings after a certain period following disconnection
    REMOTE HOLD(default):
      Retains "REMOTE"(ROP/MSU)settings until power is turned off after reconnection
    FORCED REMOTE:
      Always operates with "REMOTE"(ROP/MSU)settings

  3. Support for Standby Function with Direct ROP - UCX100 Connection
    In addition to the conventional standby function where the ROP is connected to a CCU(AK-UC700), standby operation is also supported when the ROP is directly connected to the UCX100.
    Power ON/Standby control is available via the ROP "HEAD POWER" button.
    During standby, video output, audio output, and similar functions are stopped(some functions continue operating).

    Supported ROP models(direct connection control):
    AK-HRP1010: Ver.1.29-00-0.00 or later
    AK-HRP1015: Ver.2.21-00-0.00 or later

  4. Support for Bulk Deletion of HOST Authentication Information
    [Related menu(OSD)]
      ACCOUNT SETTING > HTTP > HOST AUTH. DELETE

  5. Support for Changing Camera Number from Directly Connected ROP

    Supported ROP models:
    AK-HRP1000: Ver.5.19-00-0.00 or later
    AK-HRP1005: Ver.5.19-00-0.00 or later
    AK-HRP1010: Ver.1.29-00-0.00 or later
    AK-HRP1015: Ver.2.21-00-0.00 or later

History of release note
Preparation
for Upgrade

Download firmware file.
Copy the file to USB memory device(Type C).
Connect the USB memory to AK-UCX100 and update it.
Firmware update takes max.120 min.

Please refer to the Update Procedure for details.