| Content |
SYSTEM VERSION 01.55-000-00.00
Revision Overview
Please refer to the latest Operating Instructions for details.
- Auto Focus Function
Phase Detection Autofocus (PDAF) makes autofocus possible even in this studio system camera.
[Related Menu]
FOCUS SETTING > FOCUS MODE: MANUAL/AUTO
AF SPEED: [1] - [10]
AF AREA SIZE: [SMALL][MID][LARGE]
AF AREA POSITION: [U.LEFT], [U.CENTER], [U.RIGHT], [LEFT], [CENTER], [RIGHT], [B.LEFT], [B.CENTER],
[B.RIGHT]
- Added a menu for skew reduction.
[Related Menu]
BASIC CONFIG > SCAN MODE: NORMAL/LOW SKEW
- Added REMOTE BACK FOCUS (Remote Back Focus RBF) Function
Back focus adjustment can be performed remotely from the ROP.
(As of December 2025) Compatible ROP models: AK-HRP1010, AK-HRP1015)
- Added EBU mode* to Preset Matrix
*A matrix setting based on EBU-NORMAL for AK-UC4000
[Related Menu]
PAINT > LINEAR MATRIX > PRESET MATRIX: HD/NORMAL/STD1/STD2/CINEMA1/CINEMA2/EBU/USER
COLOR CORRECTION > PRESET MATRIX: HD/NORMAL/STD1/STD2/CINEMA1/CINEMA2/EBU/USER
- F-drop and Vignetting Compensation (FVC)
When connecting a lens for the first time, obtains correction data from the lens. Automatically corrects
F-drop and vignetting according to the lens position.
[Related Menu]
MAINTENANCE > FVC ADJUST
SUB DISPLAY > STATUS INDICATOR > FVC
SUB DISPLAY > MODE CHECK IND > FVC
- Supports UHD TRUNK (ST2110/JPEG XS) input
[OSD MENU / WEB]
Previous: HD TRUNK (CCU_CONNECT/ST2110/JPEG XS)
Updated: UHD TRUNK (ST2110/JPEG XS), HD TRUNK (CCU_CONNECT)
[Related Menu]
IP SIGNAL > ST2110 COMMON > TRUNK VIDEO TX > FORMAT
- Event Log Improvements
Event and error logs can now be output to files and downloaded to USB media from the OSD menu or to a PC via
the web screen.
- When the VF Dark Gain Function* is enabled, its status is displayed on the OSD.
*When the subject is dark and VF visibility is reduced, this function enhances the dark areas of the VF
image to ensure visibility. [Related Menu]
SUB DISPLAY > STATUS INDICATOR > VF DARK GAIN: OFF, ON
- CAM NUMBER Support
[Related Menu]
[OSD] BASIC CONFIG > CAMERA NUMBER 1-99
[WEB] Setup > System > Basic Config > CAMERA NUMBER 1-99
- USB-C Connector Supports PD (up to 27W) power supply.
[Related Menu]
MAINTENANCE > DC OUT MODE: DC OUT/USB, USB PD
- Supports Jumbo Frame (MTU=9000) for LAN TRUNK communication.
Jumbo Frame (9000 bytes/frame) can now be passed through the LAN TRUNK line.
This allows data output by virtual systems and other devices to be accessed via the TRUNK line.
- The following issues have been fixed:
(1) ABB may fail with 24P/30P/25P.
(2) In an ST2110 redundancy environment, unstable SFP PRI connections may cause the SFP SEC video to
freeze.
(3) LAN communication is disabled when a specific subnet mask is set.
When DHCP is enabled and the subnet mask is set to anything other than <255.255.255.0>, <255.255.0.0>, or
<255.0.0.0>,.
(4) Block noise may appear in the main/streaming output image when streaming UHD content.
|