Improvement

1. When the setting menu is initialized or the stored USER FILE is loaded, the SDI2 output setting on SmartUI is not correctly applied. This is corrected.
   This correction involves SDI2 output setting being initialized to be 1080P/1080i/720p after the update to 34.13- or later. So please set it again as needed.
   Whichever version the firmware is, displayed SDI2 output setting matches the actual operation of equipment, so there is no problem.

New features

1. Menu is added to improve the convenience in direct connection with AG-BS300.
   USER SW -> RET SW : TALK
   IN/OUT SEL -> SDI OUT1 CHAR : ON / MON CHAR / OFF
   IN/OUT SEL -> SDI OUT1 ZEBRA : ON / MON ZEBRA / OFF
   IN/OUT SEL -> HDMI OUT SIGNAL : MON / VF / SDI IN
   IN/OUT SEL -> MON OUT ZEBRA : ON / OFF
   DISPLAY SETUP -> EVF RC MENU DISP : ON / OFF
   
   These items enable the following applications.
   a) SDI OUT 1 is the main output which is set so that the menu or zebra is not displayed on it. For the display of menu, VIDEO OUT is used.
   b) HDMI output is set for displaying the return signal and HDMI monitor is used for prompter check.
   c) HDMI monitor is used instead of EVF.
   d) The camera’s VF is used without displaying the menu on it.
   e) As until now, the display of menu or zebra on SDI OUT 1 is linked with the settings on SmartUI while it is used.
   f) TALK function can be assigned to RET button.
   
   Click here to see the FAQs.
   
   
2.  23.98PsF is supported in direct connection with AG-BS300.
3. Support the serial connection with AK-HRP200.
4. DELETE LAST CLIP function is added to UserSW menu assignment item.
5. Support the enhanced functions of P2 Cast (Ver.2).
1. P2 Cast "Direct Transfer" function is supported. Hi-Res data can be transferred to FTP servers other than P2 Cast.
2. When the cameras receive the Meta Data from P2 Cast, the indications are displayed on OSD. Besides the information about “Play List Export” and “Streaming” is displayed on OSD. For five seconds, the indications are displayed at the center of OSD.
3.  Improvement is made so that the percentage of transfer progress can be updated in real time with no need to reflesh the Upload List on the camera manually.
4. 
   [Additional Info] P2 Cast : Cloud server service for broadcast cameras. The P2 Cast is currently in service only in the USA and Europe.
   Proxy data can be transferred from a P2 camera connecting to the network and simple editing is performed to it on the cloud server. P2 camera will upload only necessary portion of Hi-Res video data based on EDL.
   For more detail, please refer to the operating instructions of P2 Cast, etc..