Download
Name Software(Firmware) Update Data
Last Update Jul., 13, 2020
Model AW-HN40 series 
(AW-HN40H W/K,   AW-HN65H W/K,
AW-HN38H K/W) 
Registered
Name/Size		 TC58NYG0K15Z/ 49.4MB
Update Tool / VSI6208B
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.94

[ AW-HN40 /65 ]

  1. A CGI command to specify the center position has been added.
    If you specify the predetermined position (H position/V position) with a parameter, you can move the Pan/Tilt so that the position becomes the center.
    This command is usually used by external applications.

[ AW-HN38 ]

  1. The center position command is not available on these models. However the firmware will be updated according to above models.

 
History of release note
Preparation
for Upgrade
Download firmware file.
Connect the Windows PC to the camera via LAN.
Start the Update Tool and access the camera.
Assign the firmware file and update it according the update procedure.

<OS>
Windows7
Windows8.1
Windows10