Download
Name Software(Firmware) Update Data
Last Update Dec., 5, 2019
Model AW-HN40 series  (AW-HN40H W/K,
  AW-HN65H W/K, AW-HN38H K/W) 
Registered
Name/Size
TC58NYG0K15X/ 49.3MB
Update Tool / VSI6208B
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.88

Improvement

  1. When all octet values of the IP address of the connected remote controller were 3 digits, the notification of the camera was not updated. Therefore there was a problem that the camera status information was not displayed on the remote controller. In this case, there is no problem with camera control.
    This problem has been corrected.

    Example of symptom
    192.168.100.100:NG
    192.168.99.100: OK
    192.168.100.99: OK

 

History of release note
Preparation
for Upgrade

Download firmware file.
Connect the Windows PC to the camera via LAN.
Start the Update Tool and access the camera.
Assign the firmware file and update it according the update procedure.

<OS>
Windows7
Windows8.1
Windows10