Download
Name Software(Firmware) Update Data
Last Update Oct., 30, 2019
Model AW-HN40 series  (AW-HN40H W/K,
  AW-HN65H W/K, AW-HN38H K/W) 
Registered
Name/Size		 TC58NYG0K15W/ 49.3MB
Update Tool / VSI6208B
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.87

Improvement

  1. When connected to more than five remote controllers by AW-RP150 or AW-RP60 over IP, the camera will be disconnected and connected again and again. This problem has been fixed.
  2. When using a connection via the VISCA protocol, the lens information (zoom / focus / iris) is displayed with a delay of approximately 500 milliseconds after operation. This problem has been fixed.

 
History of release note
Preparation
for Upgrade
Download firmware file.
Connect the Windows PC to the camera via LAN.
Start the Update Tool and access the camera.
Assign the firmware file and update it according the update procedure.

<OS>
Windows7
Windows8.1
Windows10