| Content |
Ver 4.03-
Improvement
-
When you use AV output (AV OUT terminal = analog signal), there is a problem that the menu OSD display and thumbnail display during playback are not output.
This issue has been fixed.
Ver.4.03 also include the following Ver.4.02 contents.
New Features
- Control from AW-RP150 has been supported.
AW-RP150 Ver. 2.10-00-0.03
or later is required.
(1)You can now control some camera functions
from the AW-RP150.
LENS :ZOOM, FOCUS, IRIS
PAINT :R/B GAIN, R/B PED, M.PED、COLOR
TMP, SHUTTER, KNEE, GAMMA, AWB,
ABB, DTL, SKIN DTL, MATRIX,
COLOR CORRECTION
AUDIO :LEVEL, LIMITTER, MIC LOWCUT
UI
:REC, TALLY, ALARM, CHAR, BARS, OIS, MENU（can be operated only,
not be displayed）
(2)A menu item "ENABLE(HOLD)" has been added.
The setting values
from AW-RP150 are retained.
IP REMOTE :ENABLE / DISABLE /ENABLE
(HOLD)
- USB tethering function has been added.
NETWORK >
DEVICE SEL > USB TETHERING
You can use the USB tethering function
of smart phones to connect the camera to the Internet.
(5G line
can be used depending on the smart phone specifications.)
- A menu for confirming network connection has been added.
NETWORK > UTILITY > NET CHECKER
You can also save the check
result file in the following folder.
¥PRIVATE¥MEIGROUP¥PAVCN¥SBG¥P2SD¥netchk.txt
- CX ROP application software: Camera search function has been
added.
All cameras in the same network are listed.
You can
select a camera from the list and connect to the camera without
entering the IP address.
- Icons for LiveU or TVU Networks bonding devices have been
added. The status of the device such as the signal strength, the
remaining battery level and errors are displayed as icons on the
screen.
- RTMP streaming service "Azure Media Services" and "Twitch"
have been supported.
Improvement
- In rare cases, playing clips may stop under certain conditions. This
issue has been fixed.
|