New Features

1. Control from AW-RP150 has been supported.
   AW-RP150 Ver. 2.10-00-0.03 or later is required.
   (1)You can now control some camera functions from the AW-RP150.
   LENS :ZOOM, FOCUS, IRIS
   PAINT :R/B GAIN, R/B PED, M.PED、COLOR TMP, SHUTTER, KNEE, GAMMA, AWB,
   ABB, DTL, SKIN DTL, MATRIX, COLOR CORRECTION
   AUDIO :LEVEL, LIMITTER, MIC LOWCUT
   UI :REC, TALLY, ALARM, CHAR, BARS, OIS, MENU（can be operated only, not be displayed）
   (2)A menu item "ENABLE(HOLD)" has been added.
   The setting values from AW-RP150 are retained.
   IP REMOTE :ENABLE / DISABLE /ENABLE (HOLD)
2.  USB tethering function has been added.
   NETWORK > DEVICE SEL > USB TETHERING
   You can use the USB tethering function of smart phones to connect the camera to the Internet.
   (5G line can be used depending on the smart phone specifications.)
   
3. A menu for confirming network connection has been added.
   NETWORK > UTILITY > NET CHECKER
   You can also save the check result file in the following folder.
   ¥PRIVATE¥MEIGROUP¥PAVCN¥SBG¥P2SD¥netchk.txt
4. CX ROP application software: Camera search function has been added.
   All cameras in the same network are listed.
   You can select a camera from the list and connect to the camera without entering the IP address.
5.  Icons for LiveU or TVU Networks bonding devices have been added. The status of the device such as the signal strength, the remaining battery level and errors are displayed as icons on the screen.
6.  RTMP streaming service "Azure Media Services" and "Twitch" have been supported.

Improvement

• In rare cases, playing clips may stop under certain conditions.　This issue has been fixed.