Download
Name VariCam Software (Firmware) Update Data
Last Update Oct. 28, 2015
Model AU-V35C1G, AU-V23HS1G, AU-VREC1G
AU-VCVF1
Registered
Name/Size
VSI6060R / 156MB
VSI6043J (for AU-VCVF1 Ver 1.09)
Expected Time for Update Approx. 60min
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content  Ver 4.60-00-0.0x
   CAMERA(35):4.60-00-0.01
   CAMERA(HS):4.60-00-0.02
   RECORDER  :4.60-00-0.02
AU-VCVF1G Ver 1.09
  1. [35 ] Menu item for audio recording by Codex V-RAW Player is added.
  2. [35 | HS] The sign for audio volume on the menu is changed from “VR” to “VOL”.
  3. [35 | HS] The warning message against exhausted backup batteries of internal clock is changed so that it is not only for notification but also for prompting to reset the time. INTERNAL CLOCK HAS RESET
    <PLEASE SET TO CORRECT TIME>
  4. [35 | HS] The length of time is reduced between the pressing of REC button and the start of recording.
  5. [35 | HS] Regarding the function settings of TC I/O connectors, the default setting is changed to “TC IN”.
  6. [35 | HS] Regarding the settings of GPS automatic time correction for internal clock, the default setting is changed to “OFF”.
  7. [35 | HS] The camera behavior is changed so that, if a 32bit Offset ProRes MOV file is played (32bit Offset is not supported), the clip is marked with a red-colored “X”, which means it cannot be played, instead of judging this situation as a system error.
  8. [35 | HS] Improvement in accuracy of the process for optimization that is performed at the startup, in ProRes4444 and ProResHQ mode.

 [ 35:AU-V35C1, HS:AU-V23HS1 ]

History of release notes
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)