Download |
Name |
VariCam Software (Firmware) Update Data |
Last Update |
Aug. 3, 2015 |
Model |
AU-V35C1G, AU-V23HS1G, AU-VREC1G AU-VCVF1 |
Registered Name/Size |
VSI6060N / 156MB VSI6043G (for AU-VCVF1 Ver 1.07) Expected Time for Update
Approx. 60min |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
Ver 4.50-00-0.0x CAMERA(35):4.50-00-0.02 CAMERA(HS):4.50-00-0.00 RECORDER
:4.50-00-0.04
Improvement
- [35 ] Support for Codex V-RAW Playback
- In addition to REC,
playback operation is made possible.
V-RAW recorder
- MON OUT has a different
TC from the main stream. Please be careful not to use it.
- Audio cannot be recorded
to Codex V-RAW.
MENU: SYSTEM SETTINGS -> AUDIO RECORD ->
V-RAW AUDIO: OFF (fixed)
- When Codex V-RAW has only
small remaining capacity and also SUB_REC does, that may cause being
divided. But, in the end, the parts will be combined into a single
file without any loss when being copied to a Mac.
- [35 ] Improvement in Display of COLOR Setup Screen
- A change
is made so that a file name is displayed to be able to make sure of
a file in use.
- [35 ] Recorder Ver4.01-00-0.01
The frame marker is not correctly displayed on the camera's LCD monitor when MAIN PIXEL is set to 4K or2K. VF and VF SDI output have no problem with the display of this marker.
Explanatory notes [ 35:AU-V35C1,
HS:AU-V23HS1 ]
|
History of release notes |
Preparation for Upgrade |
Copy the update file of the Software (Firmware) to an SD
memory card. Software can be updated using this SD memory card. Please
refer to the procedure in the site.(Printing out of the procedure is recommended.) |