Download
Name VariCam LT Software (Firmware) Update Data
Last Update Mar. 17, 2021
Model AU-V35LT1G, AU-V35LT1MC
Registered
Name/Size		 VSI6227Y / 80.8MB
Expected Time for Update Approx. 60min
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content  Ver 40.52-00-0.00

New Functions (Related menu)

  1. "Custom" has been added to the aspect selection items of the VF frame marker.
    (FRAME MARK >CUSTOM ASPECT)
  2. The selection items of "Anamorphic De-squeeze" ratio have been added.
    (ANAMORPHIC DESQUEEZE >DESQUEEZE RATIO)
  3. "FALSE COLOR" menu name has been changed to "EXPOSURE MAP". New menu "EL zone" has been added.
    (OUTPUT SETTINGS >VF EI ASSIST)
  4. The GUI has been improved so that the HOME screen is not displayed on the VF when the LCD panel is disconnected to the camera.
  5. A menu related to CAMERA MENU control has been added so that "OPEN" of the menu display can be operated from ROP.
    (OUTPUT SETTINGS >VF SDI OUT >MENU DISP)
  6. Specification has been changed to be able to select "STOP" as the display unit of "Y GET" even when "MAIN COLOR" is V-709/V-406060/V-452080/V-452080L.

Improvement

  1. The 3D LUT was incorrectly applied during the REC Check under the following conditions:
    MAIN COLOR = SHADING, GAMMA = BC GAMMA
    This issue has been fixed.

 

 
History of release notes
Preparation
for Upgrade		 Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)