Download
Name VariCam LT Software (Firmware) Update Data
Last Update Jul. 11, 2018
Model AU-V35LT1G, AU-V35LT1MC
Registered
Name/Size
VSI6227S / 80.5MB
Expected Time for Update Approx. 60min
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content  Ver 31.01-00-0.00

 New Features

  1. CSS(Custom Splash Screen)
    The display screen during the boot-up process (splash screen) can be customized to show a company’s logo, etc. This software helps deter theft by using the customized Splash Screen as the owner's digital name tag.

     • Customize the Splash Screen as your company logo
     • Register owner information
     • Password setting.
    You can set a password to prevent rewriting of the above registered contents and to prevent updating / downgrade execution.
    Click here to download Custom Splash Screen

  2. Playback Order Sort-Out function
    In continuous and selective playback modes, the list on PLAY screen is changed to be displayed in ascending order.
  3. RESTART function for LIST MENU
    Restart operation via a remote control such as AK-HRP1000, etc. is made possible.
  4.  CDL/LUT setting values are saved when MAIN COLOR is set.
    This function is designed for operations via a remote control such as AK-HRP1000, etc.
    The setting values of each mode can be saved so that the original values can be restored even if unintended values are obtained.
  5.  The firmware is changed so that ISO setting values (800/5000) are not reset when NATIVE is set.
    It is changed so that each EI setting value of NATIVE/800BASE/5000BASE is not reset when ISO MODE is set to NATIVE. To prevent the values from being reset as a result of wrong dial operation on AK-HRP1000
  6.  DETAIL LEVEL setting by AK-HRP1000 DTL dial operation
    With MAIN COLOR = V-LOG and GRADING SEL = SHADING through AK-HRP1000 operation, COLOR SETTINGS-DETAIL LEVEL will work as DTL.
    This is enabled by DTL dial operation of the remote control.

  Please refer to the operating instructions for more information.

 

History of release notes
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)