| Download |
| Name |
VariCam LT Software (Firmware) Update
Data |
| Last Update |
Apr. 24, 2017 |
| Model |
AU-V35LT1G, AU-V35LT1MC |
Registered Name/Size |
VSI6227H / 77.8MB Expected Time
for Update Approx. 60min |
|
© Panasonic Entertainment & Communication Co., Ltd.
|
| Transfer |
All Rights Reserved |
| Software |
This software is update data for the
applicable model above. |
| Content |
Ver 22.31-00-0.00
- There is an error in Capture Frame Rate, which is metadata of a
clip recorded in VFR mode. This is corrected.
Occurs with Ver.
20.42 (released in July 2016) and later
Symptom When the system frequency is 23.98p/29.97p/59.94p,
the value of Capture Frame Rate (metadata of a VFR-recorded clip) is
rounded down and shown as an integer.
Example 23.98p
for SYSTEM & 48fps for VFR False: 47 True:
47.95
Therefore, the motion speed in VFR was not
correctly calculated by application software that refers to the metadata.
- The following operations cause E-37 system error. Particular lenses are used in combination when GPS is ON.
Besides, some operations cause E-36 system error.
This problem is
fixed.
|
| History of release
notes |
Preparation for Upgrade |
Copy the update file of the Software
(Firmware) to an SD memory card. Software can be updated using this SD
memory card. Please refer to the procedure in the site.(Printing out
of the procedure is recommended.) |