Download
Name	AG-UX90 series Software (Firmware) Update Data
Last Update	Nov. 20, 2017
Model	AG-UX90 series AG-UX90PJ AG-UX90PB AG-UX90PX AG-UX90EJ AG-UX90EN AG-UX90ED AG-UX90AN AG-UX90MC
Registered Name/Size	DV91000002H / 58.1 MByte  Expected Time for Update Approx. 3min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver. 1.07-  After a test tone is output, if you switch to camera mode and start recording, on rare occasions periodic noise is recorded. This problem is fixed. If the recording is not completed correctly due to a power interruption or others, the clip will be repaired automatically by rebooting the camera. But, if the card is in the different slot from the one used in this incomplete recording and the auto-repair process is started, the damaged clip (MOV/MP4 file) will be deleted. This will not occur on files except MOV/MP4 mode. This problem is fixed.
	History or Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)