UX90

Name

AG-UX90 series Software (Firmware) Update Data

Last Update

Apr. 6, 2017

Model

AG-UX90 series
AG-UX90PJ AG-UX90PB AG-UX90PX AG-UX90EJ AG-UX90EN AG-UX90ED AG-UX90AN AG-UX90MC

Registered
Name/Size

DV91000002F / 58.0 MByte
Expected Time for Update Approx. 3min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver. 1.05-

For AG-UX90ED India area model only
1. Default setting value of Scene File is changed.
  Default is changed from F1 to F4.
  After this update is completed on India area model, if "INITIAL SET" -"SCENE" is executed to initialize its settings, F4 is set as the default setting of Scene File. (On models for other areas, F1 is still the default setting as always.)
  
  If menu settings including Scene File are initialized, a customized state of settings will be changed. So it is recommended that those settings should be stored on an SD memory card before "INITIAL SET” is executed.
2. Default setting values of LCD is changed.
  COLOR
  Default is changed from "0” to an equivalent of "+5"
  CONTRAST
  Default is changed from "0” to an equivalent of "+5”

History or Release note

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AG-UX90 series Software (Firmware) Update Data
Last Update	Apr. 6, 2017
Model	AG-UX90 series AG-UX90PJ AG-UX90PB AG-UX90PX AG-UX90EJ AG-UX90EN AG-UX90ED AG-UX90AN AG-UX90MC
Registered Name/Size	DV91000002F / 58.0 MByte Expected Time for Update Approx. 3min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver. 1.05- For AG-UX90ED India area model only Default setting value of Scene File is changed. Default is changed from F1 to F4. After this update is completed on India area model, if "INITIAL SET" -"SCENE" is executed to initialize its settings, F4 is set as the default setting of Scene File. (On models for other areas, F1 is still the default setting as always.) If menu settings including Scene File are initialized, a customized state of settings will be changed. So it is recommended that those settings should be stored on an SD memory card before "INITIAL SET” is executed. Default setting values of LCD is changed. COLOR Default is changed from "0” to an equivalent of "+5" CONTRAST Default is changed from "0” to an equivalent of "+5”
Content	History or Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)