Download
Name Software(Firmware) Update Data
Last Update Mar. 6, 2025
Model AW-UR100 GJ/MC
Registered
Name/Size		 DV91000704H / 81.2MB
Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.28
  1. Assigning an IP address via DHCP may result in the display remaining at the default setting (192.168.0.10) regardless of the valid IP address value. This problem has been fixed.
  2. The ATW function may not have worked properly depending on the usage environment. Internal processing has been improved, and the stability of ATW operation has been improved.
  3. There was a problem where changing the Camera Title did not update the name of the NDI connected camera. This has been fixed.
  4. New usable P/T control command has been added. The HAC command has been supported, which allows for more precise speed/acceleration specification, and can be used with Pan Bar systems, etc.

History of release note
Preparation
for Upgrade
Download firmware file.
Install the EasyIPSetupToolPlus software to a Windows PC. Connect the PC to AW-UR100 via LAN.
Update it according the update procedure, please.
<OS> Windows10 / Windows 11

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)