Download |
Name |
POVCAM Software (Firmware) Update Data |
Last Update |
Dec. 25, 2019 |
Model |
Recorder: AG-UMR20 Camera Head:
AG-UCK20 |
Registered Name/Size |
DV9100007_H / 79.0 MByte Expected Time for Update
Approx. 3min |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
Ver. 1.13- We’ve improved the following.
- Even if a remote controller IP address has 3-digit value in every
octet, the controller can display a renewal notification from a camera.
(Formerly it couldn't display it, but it could control the camera all
right.)
Before improvement 192
. 168 . 100 . 100 :NG 192 . 168
. 99 . 100 :OK 192 . 168 . 100
. 99 :OK
- A recorder doesn’t reboot on its own even if you run it for more
than 49 days continuously. (Accurately 49.7 days including standby mode
period.)
- Only when a recorder works with [AUTO REC INPUT] ON, it can restart
recording immediately even just after stopping.
- You can receive streaming video with Google Chrome or Microsoft
Edge even if you select M-JPG mode.
- Even when you turn on multiple AW-RP50 controllers simultaneously,
a recorder can display correct information about a camera which is connected
to the controller.
|
History of release note |
Preparation for Upgrade |
Copy the update file of the Software (Firmware) to an SD
memory card. Software can be updated using this SD memory card. Please
refer to the procedure in the site.(Printing out of the procedure is recommended.) |