Download |
Name |
POVCAM Software (Firmware) Update Data |
Last Update |
Sep. 21, 2017 |
Model |
Recorder: AG-UMR20 Camera Head:
AG-UCK20 |
Registered Name/Size |
DV9100007_F / 79.0 MByte Expected Time for Update
Approx. 3min |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
Ver. 1.09-
- The REC lamp on the web browser is improved so that it is
lit only during the recording even when PRE-REC is enabled.
( This
is the final solution after the temporary improvement by the last firmware
update Ver. 1.05. )
Its description is changed back to the original.
WEB screen (PC) : SD/REC
WEB screen (Mobile terminal) : REC
- After a test tone is output, if you switch to Recording Mode
and start recording, periodic audio noise is recorded on rare occasions.
This problem is
fixed.
- If you display the color bar with a test tone and then perform
REC-Check, the test tone is played while the recorded video is played.
This problem is fixed.
- If an SDI-IN signal is inserted, the unit may reboot on rare
occasions. This problem is fixed.
- Response of camera for external control is different from the interface specification.
This response is fixed.
|
History of release note |
Preparation for Upgrade |
Copy the update file of the Software (Firmware) to an SD
memory card. Software can be updated using this SD memory card. Please
refer to the procedure in the site.(Printing out of the procedure is recommended.) |