Download
Name Software(Firmware) Update Data
Last Update Apr. 26, 2021
Model AW-UE4 K/W / G/GN/MC
Registered
Name/Size		 DV91000486J / 22.8MB
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.68
  1. "Power On Position" function has been added.
    When you start up the camera, the pan / tilt position is reproduced at the position operated just before standby.
  2. Regardless of whether the power supply is USB or PoE, the camera may not be recognized as a USB device even when the PC connected via USB was started. This problem has been fixed.
  3. At startup, the green LED that indicates the start of the camera may not light for a long time.
    When you use the camera connected to a PC via USB, the USB power supply and data communication start timing may differ depending on the PC startup conditions. As a result, it may take a long time to start UE4 (to light up the Green LED). This problem has been fixed.
  4. Even though the camera setting is Standby, the video may be output from USB (UVC output). This problem has been fixed.
History of Release note
Preparation
for Upgrade
Download firmware file.
Install the setup software to a Windows PC. Connect the PC to AW-UE4 via LAN.
Update it according the update procedure, please.
<OS> Windows10

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)