Download
Name Software(Firmware) Update Data
Last Update Mar. 10 , 2020
Model AW-UE4 K/W / G/GN/MC
Registered
Name/Size		 DV91000486B / 21.9MB
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.23

We’ve improved the following.

  1.  JPEG streaming (1Gb-Ethernet) did not work properly in some cases with web browsers. This problem was fixed.
  2.  We have changed a start-up specification at the moment when you turn on the unit for the first time.
    Previous version: Camera started up in standby mode when the power was turned on.
    New version: Camera starts up immediately after turning on the power.
    After updating the firmware, AW-UE4 can be used without a remote controller as soon as turning it on.

Before starting update turn off the power of the camera once before performing the update. Please be sure to read the update procedure.



Preparation
for Upgrade
Download firmware file.
Install the setup software to a Windows PC. Connect the PC to AW-UE4 via LAN.
Update it according the update procedure, please.
<OS> Windows10

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)