Download |
Name |
Software(Firmware) Update Data |
Last Update |
Dec 21, 2023 |
Model |
AW-UE160 W/K PJ/EJ/ED/MC/PC
|
Registered Name/Size |
DV91000654J / 406 MB |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
SYSTEM VERSION 1.66
Improvement
- The MoIP-compatible formats have been expanded to include:
1) Support for ST2110 JPEG-XS TX (MAIN/CROP) and RX (RETURN)
[ Related menu ] :
BASIC CONFIG > SFP+ MODE: ST2110 JPEG-XS
IP SIGNAL > JPEG-XS TX VIDEO SELECT: MAIN / CROP
and others
2) Compatible formats for ST2110 RX (RETURN) have been added.
* ST2110 TX (MAIN/CROP/MONI) is already supported
- "Cyclic Synchronous Position Control" function has been added
to enable more precise P/T control.
* The camera side is controlled as the master for timing and utilizes UDP for fixed-cycle command communication rather than TCP.
[ Related menu ] : Cyclic Synchronous Position Control > Cycle time: ms
and others
- "PRESET PTZ SYNC MODE" has been added
to allow for simultaneous completion of PTZ movements during preset playback.
[ Related menu ] : PRESET PTZ SYNC MODE: ON
- The optional measurement range (WINDOW) of AUTO IRIS can be set.
[ Related menu ] : PAINT > IRIS > WINDOW SELECT: 5
- SFP+ port NMOS control has been improved to operate without the need for LAN connection.
- The following problem when using Kairos Cloud (Japan only) have been addressed:
• Status display "Live" during distribution may not displayed properly.
• Certain operations using "Creator" may cause the UE160 status display to go offline.
- When using autofocus, it may take some time to focus.This problem has been fixed.
- When using High Bandwidth NDI, the NDI stream may stop. This problem has improved.
Please refer to the latest operating instructions for detailed information on the new features.
|
History of release note |
Preparation for Upgrade |
Download firmware file. Connect the Windows PC to
AW-UE160 via LAN. And update it according the update procedure.
Firmware update takes approx.40 min.
|