New Features

1. The output of Pan / Tilt / Zoom / Focus / Iris information (tracking information) are added on serial (RS 422) and IP, assuming use in virtual studio system. The commands conforming to the free-d protocol are sent.
2.  
3.   Related Menus　Top Menu ->System ->Tracking Data Output
4.     Serial: Off / ON
5.     IP: Off / ON
6.  
7. For details, please refer to the latest Operating Instructions. ("Tracking data output", etc.)

Improvement

• The zoom speed reaches the maximum speed at the 22nd step out of 50 steps, and remains the maximum speed after the 23rd step.
  The zoom speed is changed correctly to reach the maximum speed at the 50th step. Therefore, the zoom speed with respect to the lever operation amount is slower than the speed in the previous version.
• Note:The zoom may not work at the timing according to the previous version of AW-UE150 on a tracing memory function of AW-RP150/AW-RP120 or on an application/sequence that you have created.
  After updating the AW-UE150 to Ver.2.16, you should reconfigure the tracing memory or the application/sequence as required.