Download
Name Software(Firmware) Update Data
Last Update Apr. 4, 2022
Model AW-UE100 K/W  /P/E/MC/PC/ED
Registered
Name/Size		 DV91000445M / 81.5MB
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.54
  1. NDI|HX "version 2" has been supported for the optional upgrade function NDI|HX.
    Cameras activated in previous "version 1" will inherit that information. Therefore you can use it even after updating the camera body.
  2. The camera can be used with MediaBridge (Cloud Platform).
    The specifications for SRT protocol settings have been expanded.
    You can use IPv4, IPv6, or domain names for SRT protocols that were previously only available in IPv4.
    The setting item name have been changed from "Destination IP Address (IPv4)" to "Destination URI".
  3. Encryption has been added to communication with EasyIPSetupToolPlus.
    Related menu: Setup > Easy IP Setup Tool Plus > Plain text usage : Enable / Disable (Default)
  4. The encryption protocol TLS 1.3 can be used.
    When you use HTTPS to access the camera, you can use TLS 1.3 as the encryption protocol.
    Related menu: Setup >  HTTPS mode
  5. The mDNS settings can be used.
    This setting allows you to access the camera via HostName.
    Related menu: mDNS Host name
  6. A menu to limit the lighting function of Tally has been added.
    This allows you to choose to turn off the camera's tally LED lamp.
    Related menu: Tally LED Limit R (or G) : Unlimit/ Limit
    If you select "Limit" setting, only tally lamp of the camera is restricted. The external remote controller remains enabled.
  7. The Camera ID has been added to the tracking data setting item*.
    *Settings for the output of tracking data to be used in a virtual studio system or elsewhere.
    Related menu: System > Tracking Data Output > Camera ID: 0x00 - 0xFF

History of release note
Preparation
for Upgrade
Download firmware file.
Install the EasyIPSetupToolPlus software to a Windows PC. Connect the PC to AW-UE100 via LAN.
Update it according the update procedure, please.
<OS> Windows10

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)