Download
Name Software(Firmware) Update Data
Last Update Dec. 22, 2020
Model AW-UE100 K/W  /P/E/MC/PC/ED
Registered
Name/Size
DV91000445H / 86.7MB
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.33
  1. The streaming format “MPEG2-TS over UDP” has been added.
  2. A menu has been added to invert the P/T information of "Free D" for the convenience of hanging settings.
  3. Supports SNMP v3 (Simple Network Management Protocol)
  4. Supports TSL5.0 protocol (R, G tally control)
  5. A menu has been added to Enable/Disable Referrer check (CSRF measure) (default: Enabled)
    - If access to the Web screen is unstable in the Global Network environment, disabling "Referrer check" may stabilize the operation.
    - When "Referrer check" is disabled, it cannot be confirmed whether it is an unauthorized access source.

Improvement

  1. The items of "P/T/Preset" has been added to the Image Adjust screen. You can make adjustments while operating.
  2. The Popup screen is displayed only overwriting Preset registration.
  3. O.I.S. has been improved.
    In particular, high-frequency vibration has been suppressed. In addition, detection accuracy has been improved.
  4. Zoom movement has been improved.
    The response performance of IRIS has been improved.
  5. Preset P/T function has been improved.
    The accuracy of the P/T position when booting from standby has been improved. The preset minimum speed has been changed.

History of release note
Preparation
for Upgrade

Download firmware file.
Install the EasyIPSetupToolPlus software to a Windows PC. Connect the PC to AW-UE100 via LAN.
Update it according the update procedure, please.
<OS> Windows10

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)