Download
Name Software(Firmware) Update Data
Last Update Jun., 17, 2025
Model AK-UCU700/S/P/PS/E/ES/MC/MS
AK-UCU710/S/P/PS/E/ES/MC/MS
Registered
Name/Size 		DP91000488G / 153 MB 
Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
  • AK-UCU700 CCU VERSION :  0D.62-000-01.00
  • (AK-NP701G) MOIP VERSION :  05.8A-000-00.06
  • (AK-NP703G) CODEC VERSION :  01.18-000-00.00
  1. Supports AK-UCX100 Ver.1.33 Additional formats
    [ FREQUENCY：59.94Hz ]
    　2160/29.97p、2160/23.98p
    　1080/29.97p、1080/23.98p
    [ FREQUENCY：50Hz ]
    　2160/25p、1080/25p
  2. Supports JPEG XS PAYLOAD setting
    　Related menu　SETUP MENU> NETWORK >SFP1
    　> SFP1 TX　 PAYLOAD TYPE
  3. Supports ST2110-40 (ANC Data) output (TX only)
    SMPTE 299M, SMPTE 352M
    　Related menu　SETUP MENU> NETWORK> >
    　MAIN ANC DATA TX : IP ADDRESS, PORT
  4. Supports 31-bit subnet mask
    The IP address for LAN, SFP1, and SFP2 can now be set to 31 bits, "255.255.255.254".
  5. Display a warning when the CAM connection times out　
    　If the optical signal is received normally but a normal connection cannot be established due to incorrect settings, the message "Please Check Camera Connection" is displayed
  6. Improved the stability of SRT distribution　
  7. Fixed a problem with ST2110 output when a specific multicast group address is set　
  8. Fixed the position of the SKINTONE DTL CURSOR when selecting the TrueP format　
  9. Fixed a problem with ROP connection, such as a disconnection　

History of Release note
Preparation
for Upgrade 		Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)