| Download |
| Name |
Software(Firmware) Update Data |
| Last Update |
October 3 , 2019 |
| Model |
AK-UCU600 /S
AK-UCU600E/ES
AK-UCU600MC/MS
AK-UCU600P/PS |
Registered
Name/Size |
DV91000242G /73.4MByte |
|
© Panasonic Entertainment & Communication Co., Ltd.
|
| Transfer |
All Rights Reserved |
| Software |
This software is update data for the
applicable model above. |
| Content |
| Firmware Version |
|
|
| |
AK-UCU600 only |
AK-UCU600 with AK-NP600G |
| VERSION |
0F.94-000-01.00 |
11.A2-000-01.31 |
| SOFTWARE |
01.27- |
01.27- |
| NETWORK |
01.02- |
01.02- |
| UHD FPGA |
01.08- |
01.08- |
| HS FPGA |
01.08- |
01.08- |
| RETURN FPGA 1 |
03.29- |
03.29- |
| RETURN FPGA 2 |
03.13- |
03.13- |
| MAIN FPGA |
01.16- |
01.16- |
| ICOM FPGA |
03.01-00-01.00 |
03.01-00-01.00 |
| USC FPGA |
01.08- |
----- |
| MOIP |
----- |
03.16-000-00.31 |
The following functions are added.
(Items are added to the related menus.)
AK-NP600 is required to be installed
when updating the firmware.
- Supports following INPUT/OUTPUT on MoIP.
| Camera Output |
Already activated |
| RET Input |
Already activated |
| Audio Input |
Already activated |
| HD TRUNK Output |
New |
| HD PROMPTER IN |
New |
| INTERCOM |
New |
| PGM Input |
New |
| TALLY |
New |
Please refer to the operating instructions for details.
- Supports the protocol command for reading a MAC Address.
|
|
History of Release note |
Preparation
for Upgrade |
Copy the update file of the Software
(Firmware) to an SD memory card.
Software can be updated using this SD
memory card.
Please refer to the procedure in the site.(Printing out
of the procedure is recommended.) |