Download
Name Software(Firmware) Update Data
Last Update July 26 , 2021
Model AK-UC4000G/GS
AK-UC4000MC/MS
Registered
Name/Size		 DV91000241L /44.1MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Firmware Version 0B.E8-000-00.04/0B.E8-000-00.03  
CAM MAIN 1.58-
NETWORK 1.02-
ROM TABLE 1.05-
CAM FPGA 2.0C-
AVIO FPGA1 03.7C-000-00.01
or
03.7C-000-00.00　*
* There are two types of the above versions depending on the production timing.  
INCOM FPGA 3.01-
  1. In a high temperature environment, the SDI1 and SDI2 output images may become abnormal. (Symptom example: The image may be broken due to signal synchronization failure.)
    This problem has been fixed by improving the internal processing.
  2.  FILTER LOCAL Switch sets whether to adjust the ND filter manually or remotely. According to the design specifications, when the switch is turned to remote, the ND filter used remotely last time is applied.
    However, there was a problem that the ND filter does not switch even if the FILTER LOCAL switch is set to remote. This problem has been fixed.
  3. Paint setting menu has been added when V-LOG is set in COLOR SETTING.
    SYSTEM MODE > V-LOG PAINT SW : ON / OFF (Default value is OFF)
History of Release note
Preparation
for Upgrade		 Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)