Download
Name Software(Firmware) Update Data
Last Update  October, 25 , 2017
Model AK-UB300G
AK-UB300MC
Registered
Name/Size		 DV91000067D /33.8MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Firmware Version 07.52-000-00.00  
  1. HDR/SDR Switching: Function that allows switching between HDR and SDR for each output.
    ・HDR/SDR selection item is added to SYSTEM MODE and IN/OUT SELECT menus.
  2.  HDR-PAINT: Function that allows adjusting the Gamma curve when HDR is applied.
    ・Variable menus are added for BLACK GAMMA and KNEE in HLG MODE.
    ・Variable menus are added for GAIN and CLIP in SDR CONVERT MODE.
  3. SHOCKLESS WB: Function that makes WB shockless when COLOR TEMP is changed
    ・ON/OFF selection and SPEED setting menus are added for SHOCKLESS WB.
  4. Variable range of M.PED is extended.
    ・Selection item to double the variable amount is added to MASTER PEDESTAL RANGE menu.
  5. Variable range of MASTER BLACK GAMMA is extended.
    ・Setting range of MASTER BLACK GAMMA is changed from ±32 to ±48. 　
  6. AK-UTS03 (3G TICO UHD Output option board) is supported.
    ・The function of displaying the version of AK-UTS03 is added to AK-UB300 camera’s menu and the UB300 Setting Tool. (TENC FPGA) 　
  7. UHD 29.97p/ 25p/ 23.98p /29.97PsF /25PsF /23.98PsF: Following menus are improved.
    MENU
    ・UHD SDI OUT TYPE: 3G SDI is fixed to LEVEL-B when 2 Sample INT is set.
    ・IN/OUT SELECT: UHD-SDI 3G SDI not displayed

 
 History of release note
Preparation
for Upgrade		 Software can be updated using the UB300 Setting Tool.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)