Download | |
Name | Driver Software Update Data for 16GB/32GB P2 Card |
Last Update | December 28, 2007 |
Model | AJ-SPX800P/SPX800E/SPX900E/SPX900MC |
Registered Name/Size |
vsi4477g /19.5MByte (AJ-SPX800P) vsi4478g /19.5MByte (AJ-SPX800E) vsi4479g/19.5MByte (AJ-SPX900E) vsi4480g/19.5MByte (AJ-SPX900MC) |
Caution | During updating, the SD access LED may stuck ON for a few minutes. Even in this case, do not shut down the power and wait until the access starts. |
Software | This software is update data for the applicable model above. |
Content | SYMPTOMS P2 Driver software for PC will not installed correctly or file transfer speed from PC to P2 card in camera recoder through USB port is slow. RESOLUTION To resolve this problem, update this firmware. After updating the firmware, please re-install the P2 Driver software for PC. You cannot roll back firmware to a previously installed firmware after you install this. |
Preparation for Upgrade |
Please download the update data from download page to your PC and copy it to SD Memory Card which is formatted by SD Formatter with whole "PRIVATE" folder. When upgrading, please proceed it with reference to the procedure in the site. (Printing out of the procedure is recommended.) |
Panasonic Entertainment & Communication Co., Ltd. © Panasonic Entertainment & Communication Co., Ltd. |
|
Transfer | All Rights Reserved |