1. One shot CAC function was added.
   Chromatic aberration is compensated based on the shooting image.
2. Haze elimination function was added.
3. The display of internal focus and zoom information of lens was added.
4. The display of the output signal before establishing communication between camera and IPU at power-on was changed from a blue screen to gray.
   In addition, the message "STARTING UP PLEASE WAIT" is displayed on the HD SDI 2 output.
5. The applied values of the scene files of the down converted HD format was improved.
   In the following cases, the scene file values of [PAINT (DC-HD)] are the same as the setting values of [PAINT (MAIN)].
   1. When you change the [PIXEL] setting from “4320 or 2160” to “1080”
   2. When you load the value of SD memory card into the scene file of [PIXEL] 1080
6. The setting values of HDR, COLORIMETRY and GAMUT in PIXEL 1080 can be changed.
7. The warning message under low temperature was added.
   A warning message such as “LOW TEMPERATURE” is displayed, and the ALARM lamp lights red.
8. PAINT settings can be changed individually for each CROP1-4 images.
9. The format settings (1080i or 1080p) can be changed for CROP1-4 output.
10. KNEE POINT variable range was expanded.
11. TALLY lamps (CAMERA, IPU, ROP) control was supported.
    In addition, TALLY frame (RED, GREEN) are added to CROP frame of SDI OUT 1-4.
12. The output signal of HD SDI 2 OUT can be changed.
13. The specifications of OPTICAL LEVEL to indicate the status of CAMERA and IPU connection was changed.
14. Camera direct image output function was added.
    When there is no connection with IPU, the simplified monochrome image is output from HD SDI PROMPT OUT.
15. Error message during startup was changed. When some error is occurred during start up, the unit automatically reboot one time. When some error is occurred even after rebooting, error message “INITIALIZATION ERROR” is displayed.

Please refer to the latest operating instructions for more details.