Download
Name Software(Firmware) Update Data
Last Update Sep. 12 , 2024
Model AW-RP60 G/MC
Registered
Name/Size		 DV91000656F / 2.34 MB
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
SYSTEM VERSION Ver 3.04-00-0.00
  1. A setting menu for the built-in auto-tracking function of the PTZ camera has been added.
    Related menu: FUNCTION > BUILTIN TRACKING
    When a PTZ camera* equipped with an auto-tracking function is connected, the menu setting for auto-tracking is possible.
    *AW-UE80, AW-UE50, AW-UE40, AW-UE30 (as of September 2024)
  2. Supports AW-UE30

  3. Supports PTZ SYNC MODE of AW-UE160
    Related menu: PRESET > SETTING > PTZ SYNC MODE*: ON/OFF
    *MODE that synchronizes the operation of the LENS and P/T during PRESET playback
    When a PTZ camera that does not support this function is connected, "-" is displayed.
  4. When 10 or more AW-UE160s were connected, switching the camera group could cause a restart. The reception process of the camera connection setting data has been optimized to improve this problem.

  5. A mode to turn off STORE every time a PRESET STORE item is registered have been added.
    Related menu PRESET STORE
    REPEAT: Continuous PRESET STORE is possible. Press STORE button to turn off STORE. (Previous specifications)
    ONCE: Turn off STORE after each STORE registration.

  6. Operability of gateway setting menu has been improved.
    Changed so that the setting value is not cleared even when changing pages while operating the setting menu screen, improving operability.
    In the previous specifications, when changing to another page after setting the gateway, only the end of the setting value returned to the value before the change.
  • Rebooting after this update will take longer than after a previous update. You can check the progress by turning on the button on the main unit. Please be careful not to turn off the power during the process.
  • First, 10 PRESET buttons light up. Gradually turn it off as the process progresses.
Click here to see history of release note
Preparation
for Upgrade
Download firmware file.
Install the setup software to a Windows PC. Connect the PC to AW-RP60 via LAN.
Update it according the update procedure, please.
<OS> Windows7 Windows10

You can refer to the procedure in the site.(Printing out of the procedure is recommended.)