New Functions

1. Supports connection with the new model AK-UBX100
   
   
2. A mode has been added for LAN-connected cameras that retrieves setting valuesfrom only the selected camera.
   [Relatede MENU] RP SETTING > CONNECT MODE: STANDARD/SIMPLE
   STANDARD : Retrieve the settings of all cameras (Initial value)
   SIMPLE: Retrieves setting values from only the selected camera.
   This setting may reduce the time required to switch camera groups, depending on the conditions.

Note: The restart process following this update will take longer than usual.
The progress of the update can be monitored via the illumination status of the device's buttons.
Do not turn off the power during the update process.

• At the beginning of the process, all ten camera selection buttons will be illuminated in blue.
• As the update progresses, the buttons will gradually turn off one by one, indicating the current status.