We' ve improved the following.

1. A setting menu for the built-in auto-tracking function of the PTZ camera has been added.
   Related menu: FUNCTION > BUILTIN TRACKING
   When a PTZ camera* equipped with an auto-tracking function is connected, the menu setting for auto-tracking is possible.
   *AW-UE80, AW-UE50, AW-UE40, AW-UE30 (as of September 2024)
2. Supports AW-UE30
   
   
3. Supports PTZ SYNC MODE of AW-UE160
   Related menu: PRESET > SETTING > PTZ SYNC MODE*: ON/OFF
   *MODE that synchronizes the operation of the LENS and P/T during PRESET playback
   When a PTZ camera that does not support this function is connected, "-" is displayed.
4. When 10 or more AW-UE160s were connected, switching the camera group could cause a restart. The reception process of the camera connection setting data has been optimized to improve this problem.
   
   
5. EXT CONTROL menu expanded
   Up to 10 cameras can be assigned to a maximum of 10 rail systems
   
   Related menu
   EXT CONTROL
   EXT CNT MD
   SINGLE (default, previous specifications): EXT IP is set to 1
   NULTI: EXT IP can be set to up to 10
   Set ASSIGN with the camera in EXT CONT
   <EXT CNT MD: SINGLE> OFF (default), ON, Advanced
   <EXT CNT MD: MULTI> OFF, ON-1 to 10, Adv.1 to 10
   
   
6. When using the AW-PH405 rotating head with a serial connection,
   the PAN/TILT operation may stop after a certain period.
   This problem has been fixed.

• Rebooting after this update will take longer than after a previous update. You can check the progress by turning on the button on the main unit. Please be careful not to turn off the power during the process.
• First, the 10 camera selection buttons light up in blue. Gradually turn it off as the process progresses.