We’ve added/ improved the following.

1. AK-UB300 with Pan/Tilt Head (AW-PH650/PH400/PH405) is supported.
2. The lighting of PRESET button on Pan/Tilt Head has been improved to operate in the same way as AW-RP120.
   - During STORE operation, button lights up.
   - If other STORE is operated, previous STORE is turned off.
3. Linkage with ROP (AK-HRP1000/1005 ver.4.80-00-0.03 or higher is required for ROP.) A ROP setting menu is added so that the selected camera at the AW-RP150 can be activated on the connected ROP.
4. Linkage with AV-HS6000. Switching function is supported.
5. “All Delete” function of TMEM (Tracing Memory) is added.
6. “Camera Group number” indication is added under the Status display.
7. “ND Filter” is added to the assign items of 1-4 Knob. When you rotate dial, ND is selectable.
8. “I.Zoom” status is added in Camera Info. The I.Zoom function is assignable to User Button.
9. A "CAMSEL OP" menu is added. Usually camera selection is not possible during operation (PAN/TILT/ZOOM). When this menu is set to “MULTI”, you can select another camera even during operation.
10. “IRIS LIMIT” function is added. (Only Close direction)
11. “PRESET LIST NAME” Edit function is added.
12. One of 7 colors is assignable to Each PRESET button.
13. PRESET command (of Pan/Tilt Head etc.) can be sent even if preset data is not registered. It can be turned "ANYTIME" at "EXEC MD" menu in order to have interchangeability with AW-RP120.
14. Operation direction of PAN/TILT lever setting is added.
15. PRESET LIST display is added on Status screen. PRESET information can be displayed with Lens information.

 Operation Guide