PX5000

Name

AJ-PX5000 series Software (Firmware) Update Data

Last Update

Dec. 9, 2019

Model

AJ-PX5000 G
AJ-PX2300 MC /AJ-PX5000 MC

Registered
Name/Size

VSI6323N / 56.6 MByte
Expected Time for Update Approx. 45min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver 41.33-

RTMPS (RTMP over SSL), a streaming protocol, is supported.
Security of the network authentication is improved.

A part of specifications related to network security is changed along with the strengthening of laws and regulations in certain regions. If you use the user name and password without changing the initial settings, a message is displayed prompting you to change them on the network setting screen.

Details
1. There is no change just by updating the firmware, and any operation is not required.
2. After updating, if you connect to the camera by the web application (P2 Browser and P2 Playlist) using initial password, a message prompting you to change the authentication information will be displayed. "Your user name and password are still set to the default. Please change them immediately. "
3. Please change the ID and PW as necessary.

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AJ-PX5000 series Software (Firmware) Update Data
Last Update	Dec. 9, 2019
Model	AJ-PX5000 G AJ-PX2300 MC /AJ-PX5000 MC
Registered Name/Size	VSI6323N / 56.6 MByte Expected Time for Update Approx. 45min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver 41.33- RTMPS (RTMP over SSL), a streaming protocol, is supported. Security of the network authentication is improved. A part of specifications related to network security is changed along with the strengthening of laws and regulations in certain regions. If you use the user name and password without changing the initial settings, a message is displayed prompting you to change them on the network setting screen. Details There is no change just by updating the firmware, and any operation is not required. After updating, if you connect to the camera by the web application (P2 Browser and P2 Playlist) using initial password, a message prompting you to change the authentication information will be displayed. "Your user name and password are still set to the default. Please change them immediately. " Please change the ID and PW as necessary.
Content	History of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)