PX5000

Name

AJ-PX5000 series Software (Firmware) Update Data

Last Update

Mar. 28, 2019

Model

AJ-PX5000 G
AJ-PX2300 MC /AJ-PX5000 MC

Registered
Name/Size

VSI6323L / 56.6 MByte
Expected Time for Update Approx. 45min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver 40.93-

New Features

[MC model Only] New model of LTE HUAWEI “E8372h-155” is supported.
The latest module of TVU Network is supported.

Improvement

When recording on two P2 cards, “SLOT SEL” is turned under the exceptional conditions, the footage had a problem of the playback stopping at the spanned part. This problem is fixed.
A system error occurs in rare cases while using a connection to an SFTP server. This problem is fixed.
A system error “E-37” may occur while a camcorder is RTMP streaming. This problem is fixed.

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AJ-PX5000 series Software (Firmware) Update Data
Last Update	Mar. 28, 2019
Model	AJ-PX5000 G AJ-PX2300 MC /AJ-PX5000 MC
Registered Name/Size	VSI6323L / 56.6 MByte Expected Time for Update Approx. 45min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver 40.93- New Features [MC model Only] New model of LTE HUAWEI “E8372h-155” is supported. The latest module of TVU Network is supported. Improvement When recording on two P2 cards, “SLOT SEL” is turned under the exceptional conditions, the footage had a problem of the playback stopping at the spanned part. This problem is fixed. A system error occurs in rare cases while using a connection to an SFTP server. This problem is fixed. A system error “E-37” may occur while a camcorder is RTMP streaming. This problem is fixed.
Content	History of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)