PX5000

Name

AJ-PX5000 series Software (Firmware) Update Data

Last Update

January 16, 2017

Model

AJ-PX5000 G
AJ-PX2300 MC /AJ-PX5000 MC

Registered
Name/Size

VSI6323C / 56.5 MByte
Expected Time for Update Approx. 45min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver 39.92-

New Features

High-speed transmission by bonding equipment is supported.
Securing the frequency band for streaming, displaying the information on the OSD sent from the bonding equipment, communicating the equipment information to P2 Cast, etc.
A menu is added to take GPS information from external equipment and put it into the Metadata (XML) of the contents.
Menu Item: GPS: INTERNAL / EXTERNAL / OFF
The following LTE USB Modem is supported.
• K5160 (UK）
Connection confirmed 4G/LTE Modem
Setting values for Skin Tone Effect are changed from 32 steps to 64 steps.

Improvement

The following problems, which occur when using AJ-WM50 wireless module, are fixed.
- When executing a web app in Direct mode between an Apple device (Mac, portable terminal, etc.) and P2 equipment, they may get disconnected.
- When performing FTP transfer, the GUI does not work correctly.
When 4G/LTE is enabled, HDSDI_REMOTE (menu item) cannot be selected. This problem is fixed.
Regarding the information display on P2 Cast screen, the following problems are fixed.
- The status of the camera is displayed as offline.
- The status information of Play List Export is not updated.
Regarding the streaming in P2 Cast mode, the following problem is fixed. If the camera is set to the settings below, incorrect streaming is performed.　
－ StreamingMode：AVC-G(QoS）
－ QoS Max/Min Rate: 6Mbps .

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AJ-PX5000 series Software (Firmware) Update Data
Last Update	January 16, 2017
Model	AJ-PX5000 G AJ-PX2300 MC /AJ-PX5000 MC
Registered Name/Size	VSI6323C / 56.5 MByte Expected Time for Update Approx. 45min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver 39.92- New Features High-speed transmission by bonding equipment is supported. Securing the frequency band for streaming, displaying the information on the OSD sent from the bonding equipment, communicating the equipment information to P2 Cast, etc. A menu is added to take GPS information from external equipment and put it into the Metadata (XML) of the contents. Menu Item: GPS: INTERNAL / EXTERNAL / OFF The following LTE USB Modem is supported. • K5160 (UK） Connection confirmed 4G/LTE Modem Setting values for Skin Tone Effect are changed from 32 steps to 64 steps. Improvement The following problems, which occur when using AJ-WM50 wireless module, are fixed. When executing a web app in Direct mode between an Apple device (Mac, portable terminal, etc.) and P2 equipment, they may get disconnected. When performing FTP transfer, the GUI does not work correctly. When 4G/LTE is enabled, HDSDI_REMOTE (menu item) cannot be selected. This problem is fixed. Regarding the information display on P2 Cast screen, the following problems are fixed. The status of the camera is displayed as offline. The status information of Play List Export is not updated. Regarding the streaming in P2 Cast mode, the following problem is fixed. If the camera is set to the settings below, incorrect streaming is performed.　－ StreamingMode：AVC-G(QoS）－ QoS Max/Min Rate: 6Mbps .
Content	History of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)