PX380

Name

AJ-PX380 series Software (Firmware) Update Data

Last Update

Aug. 4, 2016

Model

AJ-PX380 G/GF
AJ-PX398 MCF

Registered
Name/Size

VSI6111D / 57.1 MByte
Expected Time for Update Approx. 45min

Transfer

Software

This software is update data for the applicable model above.

Content

Ver 38.03-

New Features

The following LTE USB Modems are supported.
Connection confirmed 4G/LTE Modem
U620L (Verizon /USA)

Improvement

Immediately after a microP2 card is inserted into the slot, if it is pulled out while the access LED is blinking, an error occurs. Firmware is improved so that this is not regarded as an error unless recording is being performed in the slot with a blinking access LED.
When being used with P2 Streaming Server, if the camera fails to start steaming, rebooting is necessary. Firmware is improved so that the streaming start can be retried without rebooting.

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AJ-PX380 series Software (Firmware) Update Data
Last Update	Aug. 4, 2016
Model	AJ-PX380 G/GF AJ-PX398 MCF
Registered Name/Size	VSI6111D / 57.1 MByte Expected Time for Update Approx. 45min
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver 38.03- New Features The following LTE USB Modems are supported. Connection confirmed 4G/LTE Modem U620L (Verizon /USA) Improvement Immediately after a microP2 card is inserted into the slot, if it is pulled out while the access LED is blinking, an error occurs. Firmware is improved so that this is not regarded as an error unless recording is being performed in the slot with a blinking access LED. When being used with P2 Streaming Server, if the camera fails to start steaming, rebooting is necessary. Firmware is improved so that the streaming start can be retried without rebooting.
Content	History of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)