| Content |
Ver 36.51-
New Features
- Main-line recording onto an SDXC/SDHC memory card available
on the market, which is supposed to be for use in an urgent situation,
has so far been restricted to the codecs at 50Mbps or less. But,
to meet the users’ demand, this restriction is removed.
However,
that is not to guarantee the recording and playback operations with
SDXC/SDHC memory cards.
- Tally control from external devices (e.g. AK-HRP200 ROP) is
supported.
No menus are newly added. This feature works according
to the current Tally menu.
TALLY_LAMP (IP communication supported)
- The following dongle are supported.
WLAN :D-Link DWA-171(Australia)
, LTE :Verizon USB730L (US)
- Only for China model, the internal processing of ATW function
is changed at customers’ request.
AJ-PX298MC, AJ-PX285MC
Improvement
- The related menus are not displayed so that microP2 B cards
are not CPS-formatted by mistake.
- The cameras are designed to start installing the firmware update
immediately after it is downloaded via P2 Cast, and an improvement
is made to this current design. Menu item “Download Only” is added.
This menu item can temporarily end the update process once the download
is complete when the update command is received from P2 Cast.
- In UDP transmission, the communication process of streaming
format is improved.
- P2 SS becomes unable to be connected, and this problem is fixed..
- Improvement in stability at boot-up
- System error may occur on rare occasions under the specific
conditions, and this problem is fixed.
|