Ver 31.77-
Improvement

The status conditions of the inserted P2 card are displayed as follows at the top of thumbnail screen. 　
• NG (Red): Displayed when there is at least one defective clip that cannot be restored.
• NG (Yellow) :Displayed when there is at least one defective clip that may be restored.
• (This status conditions are not displayed at the top of the thumbnail screen of the storage device or the FTP, only of the inserted P2 cards.)

Support the enhanced functions of P2 Cast.

1. P2 Cast "Direct Transfer" function is supported. Hi-Res data can be transferred to FTP servers other than P2 Cast.
2. When the cameras receive the Meta Data from P2 Cast, the indications are displayed on OSD. Besides the information about “Play List Export” and “Streaming” is displayed on OSD. For five seconds, the indications are displayed at the center of OSD.
3. Improvement is made so that the percentage of transfer progress can be updated in real time with no need to display the Upload List to P2 Cast again.
4. 
   [Additional Info] P2 Cast : Cloud server service for broadcast camera. The supported area is Europe and USA only now.
   Proxy data can be transferred from a P2 camera connecting to the network and simple editing is performed to it on the cloud server. P2 camera will upload only necessary portion of Hi-Res video data based on EDL.
   For more detail, please refer to the operating instructions of P2 Cast, etc..
   

List of supported network USB modems
The E3276s-150 (Telenor /Norway) is added.